Posts Tagged ‘redbus-hex’

Emergency maintenance: redbus-hex.edge.enta.net

Posted: Wednesday, February 24th, 2010 at 12:08 by Ming-Yu Hsieh

25th Feb 2009 00:01 – 25th Feb 2009 04:00

During the maintenance window above, the redbus-hex.edge.enta.net router will be rebooted to resolve some configuration issues. This should take less than 30 minutes to complete, during which all directly connected customers will be out of service.

  1. Ming-Yu Hsieh says:

    This maintenance work has completed, all directly connected customers will be monitored for next 24 hours to make sure faults have been cleared. please report any issues via the usual support channels.

Planned work: redbus-hex.core.enta.net

Posted: Monday, January 18th, 2010 at 13:28 by Steve Lalonde

Tuesday 26th Jan 2010, 03:00hrs – 03:30hrs

During the maintenance window above the IOS on the router will be upgraded to resolve some configuration issues. This software upgrade will require a reboot of the router which should take approx 10 minutes to complete, during which all directly connected customers will lose connectivity.

Traffic that would normally be routed through this equipment will route via alternate paths.

  1. Steve Lalonde says:

    This work was completed successfully.