Posts Tagged ‘Colindale’

Planned Work: Broadband Upgrades

Posted: Friday, November 23rd, 2018 at 17:03 by Adam Heath

Monday 3rd December 2018 00:00 – 06:00

During the above window broadband users connected via Colindale, Columbo and Kingston interconnects will be disconnected to reconnect via higher capacity interconnects. The time per user to reconnect will usually be less than 10 minutes, if your connection does not re-establish in 10 minutes it may be necessary to reboot your router.

Users on Colindale, Columbo and Kingston interconnects that reconnect before the maintenance will reconnect on the new higher capacity interconnects.

  1. Robin Posadas says:

    This work is now commencing.

  2. Robin Posadas says:

    This work is now complete.

Planned Maintenance: Colindale

Posted: Monday, October 9th, 2017 at 13:34 by Adam Heath

Wednesday 18th October 2017 00:01 – 06:00

During the above window we will be replacing with a higher capacity router.

All services currently terminated in this location will be migrated on to the new hardware. This includes DSL, EWCS, wholesale hand-off and pseudowires terminating at this location.

All other traffic that would normally route through this location will take alternative paths.

  1. Jake Turner says:

    This work is now complete

Planned work:

Posted: Wednesday, January 13th, 2010 at 16:09 by Steve Lalonde

Thursday 21st Jan 2010, 04:00hrs – 04:30hrs

During the maintenance window above the IOS on the router will be upgraded to resolve some configuration issues. This software upgrade will require a reboot of the router which should take approx 10 minutes to complete, during which all directly connected customers will lose connectivity.

Traffic that would normally be routed through this equipment will route via alternate paths.

  1. Steve Lalonde says:

    This work was completed successfully.